industrial water pump

The HLR pump is a hygienic rotary lobe pump designed in compliance with the EHEDG specifications for plants and processes that comply with the strictest hygienic requirements. Due to the low working speed, the rotary lobe pump is characterised by a gentle pumping and low shear of the product causing less damage possible.

Submersible Sewage Pumps, with unique spiral sharp blade able to cut long fibrous in the pumping liquid. Fixed or portable installation.

Submersible Sewage Pumps, with cutting mechanism able to cut long fibrous in the pumping liquid. Fixed or portable installation.

Submersible Sewage Pumps, channel impeller, non-clog design. Fixed or portable installation.

Submersible Drainage/Sewage Pumps, with grinder, vortex impeller. Portable installation.

​Features:

• Qmax : 33 m3/hr
• Hmax : 11 m    
• MWP : 1.

Submersible Drainage Pumps, vortex impeller.

Submersible Drainage Pumps, vortex impeller. Portable installation

​Features:

• Qmax : 21 m3/hr
• Hmax : 18 m    
• MWP : 1.

Submersible Grinder Pumps, vortex impeller with grinder. Portable installation.

Submersible Drainage/Sewage Pumps, vortex impellers. Portable installation.

​Features:

• Qmax : 78 m3/hr
• Hmax : 30m    
• MWP : 2.

Submersible Drainage/Sewage Pumps, vortex impeller. Portable installation.
​
Features:

• Qmax : 72 m3/hr
• Hmax : 28m    
• MWP : 2.

Submersible Drainage Pumps, Vortex Impeller. Portable installation.

Vertical Turbine Pumps,  single or multistage. VHS or VSS with thrust bearing or VSS without thrust bearing design. Vertical turbine pumps are mixed flow, verticle installation having the advantage of small space requirement at the pump stations and the ability to start automatic or manually without any suction problem.

Vertical Sump Pumps,  single stage.

EHCV: For slightly dirty liquid
EVXV: For dirty liquid
 
Features:

• Shaft sealing: Gland Packing or Mechanical seal
• Shaft lengths: 1 to 5 m
• Qmax : Upto 900 m3/hr
• Hmax : Upto 1500 m     
• MWP : 1.

ESCA Series are Horizontal Split casing Double suction impeller with in -between bearing design, allows pumps run quietly and with minimal vibration. Coupled with dynamically balanced impeller the pumps life is greatly prolonged and therefore, increase MTBF (Mean Time Between Failure). This allows the pump to be mounted horizontally and also, vertically to save spaces.

Self-Priming Centrifugal Pumps, with semi-open impeller, suitable for dirty or waste water applications.

Solid passage size limit to 75mm (3 inches). The internal construction allows air to separate from water to achieve negative priming upon starting up.

Horizontal End Suction Pumps, design in accordance with ISO 2858.

Horizontal End Suction Pumps, design in accordance with EN733/DIN24255.

Optional: with heavy duty bearing for PN16.

Horizontal Multistage Stainless Steel Pumps, compact design with optional Auto Pressure Switch fitted to enable pressure cut in/out to save energy and avoid frequent start/stop, thus prolonging the motor life. EC Series are non-self priming, horizontal multistage centrifugal pumps. Pump is couple with motor at the same shaft and mounted on a base-plate.

Horizontal Chemical Process Pumps, design in accordance with ISO 2858/5199. EISC pumps are Horizontal End Suction, single stage volute casing and designed to ISO 2858/5199. Its ‘back pull out’ design allows for maintenances without removing the piping and pumps alignments.

Horizontal End Suction, the Euroflo EK series are non-self priming centrifugal pumps with semi-open impeller.

Vertical Multistage Pumps, in-line port position with flange designed according to DIN standard or Victaulic coupling.stainless steel casings and impellers, fitted with standard IEC motor, NEMA motors on request. All pumps are fitted with Cartridge type mechanical seal for easy change out without removing motor and adapter or the pipes.

Submersible pump for the draining clear water, groundwater or rainwater in commercial building service; the pumps is suitable for applications requiring with high head. The pump is certified according to EN 12050-2 waste water regulation. Suitable for fixed installations with coupling device or mobile if placed directly on the bottom of the tank.

Stainless steel submersible pump with microcast steel impeller, suitable for draining waste water, sandy water, muddy water with solid matter of up to 10 mm without fibres.

Features:

• Operating range: from 3 to 28 m3 /h with head up to 17 metres.