Horizontal Multistage Stainless Steel Pumps, compact design with optional Auto Pressure Switch fitted to enable pressure cut in/out to save energy and avoid frequent start/stop, thus prolonging the motor life. EC Series are non-self priming, horizontal multistage centrifugal pumps. Pump is couple with motor at the same shaft and mounted on a base-plate. The friendly design make the pumps suitable for installation in the small domestics or industrial water supply systems, The pumps is fitted with a mechanical seal and through going motor shaft.
Features:.png)
.png)
Features:
- Qmax : 8 m3/hr
- Hmax : 55 m
- MWP : 10 bars
- Temp : 0 to 90°C
- Materials : SS304, SS316
- Flange : BSP (F) Threaded
- Operation conditions:
- Flow Rate (Q): Up to 14m³/h
- Head (H): Up to 55m
- Speed: 2850 rpm (50Hz) / 3450rpm (60Hz)
- Luquid temperature range: 0°C - +90°C
- Maximim ambient temperature: +40°C
- Maximum Operation Pressure: 10kg/cm³
- Maximum Inlet pressure: limited by maximum operation pressure
- Minimum inlet pressure: According to the NPSH cure + a safety margin of 0.5m
- The maximum operation pressure depends on the temperature of the pumped liquid, refer table below:
- Pipe connections:
- Applications :
- Domestic Water Supply and Booster
- Liquid transfer and circulation of liquids within light industry and farming
- Pressure boosting
- Air-conditioning systems
- Cooling machine or cooling system
- Specialized OEM equipment
Inquiry - EUROFLO Close coupled Pumps EC, EH Series
