OMRON R88D-1SN()-ECT Servo Drive Series
Support various customization
01 100 VAC Input Models
Checklist
- R88D-1SN01L-ECT
- R88D-1SN02L-ECT
- R88D-1SN04L-ECT
02 200 VAC Input Models
Checklist
- R88D-1SN01H-ECT
- R88D-1SN02H-ECT
- R88D-1SN04H-ECT
- R88D-1SN08H-ECT
- R88D-1SN10H-ECT
- R88D-1SN15H-ECT
- R88D-1SN20H-ECT
- R88D-1SN30H-ECT
- R88D-1SN55H-ECT
- R88D-1SN75H-ECT
- R88D-1SN150H-ECT
03 400 VAC Input Models
Checklist
- R88D-1SN06F-ECT
- R88D-1SN10F-ECT
- R88D-1SN15F-ECT
- R88D-1SN20F-ECT
- R88D-1SN30F-ECT
- R88D-1SN55F-ECT
- R88D-1SN75F-ECT
- R88D-1SN150F-ECT
Functions:
1. 7-segment LED Display
A 2-digit 7-segment LED display shows error numbers, the Servo Drive status, and other information.
2. ID Switches
Two rotary switches (0 to F hex) are used to set the EtherCAT node address.
3. Charge Lamp
Lights when the main circuit power supply carries electric charge.
4. Control I/O Connector (CN1)
Used for connecting command input signals and I/O signals to an external device.
5. Encoder Connector (CN2)
Connector for the encoder installed in the Servomotor.
6. EtherCAT Communications Connectors (ECAT IN CN10, ECAT OUT CN11)
These connectors are for EtherCAT communications.
7. USB Connector (CN7)
USB-Micro B Communications connector for the computer. This connector enables USB 2.0 Full Speed (12 Mbps) communications.
8. Brake Interlock Connector (CN12)
Used for brake interlock signals.
9. Main Circuit Connector (CNA)
Connector for the main circuit power supply input, control power supply input, external regeneration resistor, and DC reactor.
Applicable models: R88D-1SAN02H-ECT/-1SAN04H-ECT/-1SAN08H-ECT/-1SAN10H-ECT
10. Main Circuit Connector A (CNA)
Connector for the main circuit power supply input and external regeneration resistor.
Applicable models: R88D-1SAN15H-ECT/-1SAN20H-ECT/-1SAN30H-ECT/-1SAN10F-ECT/-1SAN15F-ECT/-1SAN20F-ECT/-1SAN30F-ECT
Inquiry - OMRON R88D-1SN()-ECT Servo Drive Series